zh-cn 5 2007-07-20 09:16:11
最大刨削长度Max. shaping length630mm滑枕往复行程次数Number or ram strokes per minute (6 steps)14-80No./min滑枕底面至工作台面距离Distance from lower edge of ram to the surface of table25-385mm刀架最大行程Max. travel of tool head120mm刀杆最大截面积（宽×高）Max. section of tool (W×H)20×30mm工作台上工作面尺寸（长×宽）Upper working surface of table (L×W)630×400mm工作台上工作面中央T形槽宽度Width of middle T-slot on the upper surface of table18mm工作台最大水平行程Max. horizontal travel of table630mm滑枕每次往复行程工作台水平进给量范围Horizontal feed of table per reciprocating stroke of ram0.2-...]]> 2007-03-02 15:02:24
最大刨削长度Max. shaping length1000mm滑枕行程Stroke length of ram80-1000mm滑枕底面至工作台面距离Distance from lower edge of ram to surface of table1200mm刀架最大行程Max. travel of tool head160mm刀杆最大截面积（宽×高）Max. Section of tool (W×H)30×45mm刀架最大回转角度Max. Swiveling angle of tool support±60° 工作台上工作面尺寸（长×宽）Upper working surface of table (L×W)1000×2000mm工作台上工作面T型槽宽度Width of middle T-slot on the upper surface of table28mm滑枕每次往复行程滑座横向进给范围（无级）Horizontal feed of slide carriage per reciprocating stroke of ram (stepless)0.25-3mm主电...]]> 2007-03-02 15:00:49
最大刨削长度Max. shaping length500mm滑枕往复行程次数Number or ram strokes per minute (6 steps)14-80No./min滑枕底面至工作台面距离Distance from lower edge of ram to the surface of table100-370mm刀架最大行程Max. travel of tool head120mm刀杆最大截面积（宽×高）Max. section of tool (W×H)20×30mm工作台上工作面尺寸（长×宽）Upper working surface of table (L×W)440×360mm工作台上工作面中央T形槽宽度Width of middle T-slot on the upper surface of table18mm工作台最大水平行程Max. horizontal travel of table525mm滑枕每次往复行程工作台水平进给量范围Horizontal feed of table per reciprocating stroke of ram0.2...]]> 2006-09-28 14:55:24
青岛生建机械 ]]> 2006-07-31 19:54:51
]]> 2006-07-31 19:36:35
技术规格 TECHNICAL SPECIFICATIONS机床型号ModelsBY60100C最大刨削长度Max. shapping length1000mm滑枕工作行程速度（无级）Cutting speed of ram (stepless) 3-44m/min滑枕底面至工作台面距离Distance from lower edge of ram to upper surface of table80-400mm最大切削力Max. cutting force 28000N刀架最大行程Max. travel of tool head160mm刀杆最大截面积（宽×高）Max. section of tool (W×H)30×45mm工作台上工作面尺寸（长×宽）Upper working surface of table (L×W)1000×500mm工作台工作面T型槽宽度Width of T-slot on upper surface of table22mm工作台最大水平行程Max. horizontal travel of table800mm滑枕每次往复行程工作台...]]>